Gem County, Idaho
Average Well Depth in Emmett, Idaho
Wells within 5 miles of Emmett were drilled to a median depth of 127 ft, and half were between 110 and 150 ft. After drilling, water typically stood about 39 ft below ground. The median well produced 21 gallons per minute. Based on 94 Idaho Department of Water Resources well records, updated October 2026.
Historical records within 5 miles of central Emmett, not a guarantee for any property. Only drilling confirms depth, water quality and yield. Disclaimer
How deep is my well going to be?
Depth changes from one street to the next. Check the wells closest to your exact address.
Are wells near Emmett getting deeper?
Wells drilled near Emmett in the 2020s have a median depth of 151 ft, 40 ft deeper than those from the 1970s (111 ft). Budget toward the upper end of the range.
| Decade drilled | Median depth | Wells |
|---|---|---|
| 1970s | 111 ft | 14 |
| 1980s | 112 ft | 16 |
| 1990s | 118 ft | 18 |
| 2000s | 148 ft | 19 |
| 2010s | 144 ft | 15 |
| 2020s | 151 ft | 12 |
Well drilling contractors near Emmett
Get a free quote from a licensed driller matched to Gem County. No obligation.
Before you drill in Emmett
- Permit: a licensed Idaho driller files the drilling permit (a start card for a single-family home) with the Idaho Department of Water Resources.
- Health district: Southwest District Health sets septic and well setback rules for Gem County.
- City water: inside Emmett city limits, check whether you're required to connect to city water before planning a well.
- Buying land? The Premium Property Well Report adds nearby water quality, groundwater restrictions and a cost estimate for one property.
Emmett well questions
How deep are wells in Emmett, Idaho?
Wells within 5 miles of Emmett have a median depth of 127 feet, and half were drilled between 110 and 150 feet, based on 94 Idaho Department of Water Resources well records. Depth varies by location, so look up your exact address.
How much does it cost to drill a well in Emmett?
For a typical 110–150 ft household well with a pump system, a rough planning range is $8,000 to $15,000, based on Idaho averages of $28–65 per foot to drill, about $8 per foot for PVC casing and about $4,000 for the pump system. Basalt, steel casing or a long trench to the house cost more. Get a written quote from a licensed driller for a real price.
How deep is a shallow well near Emmett?
16% of recorded wells within 5 miles of Emmett are less than 100 feet deep. Shallow wells cost less to drill but are more exposed to surface contamination and seasonal water-level drops.
Do I need a permit to drill a well in Emmett?
Yes. A licensed Idaho driller files a drilling permit (a start card for a single-family household well) with IDWR before drilling. Ask Southwest District Health about septic setbacks, and check whether Emmett requires a city water hookup inside city limits.
Well depth in nearby Idaho cities
Source: Idaho Department of Water Resources well records within 5 miles of central Emmett. Updated October 2026.