Well Depth FinderSEE IT BEFORE YOU DRILL Get the reportReport $39

Ada County, Idaho

Average Well Depth in Meridian, Idaho

Wells within 5 miles of Meridian were drilled to a median depth of 249 ft, and half were between 210 and 300 ft. After drilling, water typically stood about 65 ft below ground. The median well produced 21 gallons per minute. Based on 331 Idaho Department of Water Resources well records, updated October 2026.

249 ftMedian well depth
210–300 ftTypical range (middle half)
65 ftTypical depth to water
21 gpmMedian yield

Historical records within 5 miles of central Meridian, not a guarantee for any property. Only drilling confirms depth, water quality and yield. Disclaimer

How deep is my well going to be?

Depth changes from one street to the next. Check the wells closest to your exact address.

Are wells near Meridian getting deeper?

Wells drilled near Meridian in the 2020s have a median depth of 271 ft, 55 ft deeper than those from the 1970s (216 ft). Budget toward the upper end of the range.

Decade drilledMedian depthWells
1970s216 ft45
1980s237 ft59
1990s269 ft66
2000s242 ft62
2010s251 ft60
2020s271 ft39

Well drilling contractors near Meridian

Get a free quote from a licensed driller matched to Ada County. No obligation.

Get a free driller quote

Before you drill in Meridian

  • Permit: a licensed Idaho driller files the drilling permit (a start card for a single-family home) with the Idaho Department of Water Resources.
  • Health district: Central District Health sets septic and well setback rules for Ada County.
  • City water: inside Meridian city limits, check whether you're required to connect to city water before planning a well.
  • Buying land? The Premium Property Well Report adds nearby water quality, groundwater restrictions and a cost estimate for one property.

Meridian well questions

How deep are wells in Meridian, Idaho?

Wells within 5 miles of Meridian have a median depth of 249 feet, and half were drilled between 210 and 300 feet, based on 331 Idaho Department of Water Resources well records. Depth varies by location, so look up your exact address.

How much does it cost to drill a well in Meridian?

For a typical 210–300 ft household well with a pump system, a rough planning range is $11,600 to $25,900, based on Idaho averages of $28–65 per foot to drill, about $8 per foot for PVC casing and about $4,000 for the pump system. Basalt, steel casing or a long trench to the house cost more. Get a written quote from a licensed driller for a real price.

How deep is a shallow well near Meridian?

None of the 331 recorded wells within 5 miles of Meridian are less than 100 feet deep, so plan for a deeper well.

Do I need a permit to drill a well in Meridian?

Yes. A licensed Idaho driller files a drilling permit (a start card for a single-family household well) with IDWR before drilling. Ask Central District Health about septic setbacks, and check whether Meridian requires a city water hookup inside city limits.

Well depth in nearby Idaho cities

All Idaho cities →

Source: Idaho Department of Water Resources well records within 5 miles of central Meridian. Updated October 2026.

Get the property well report · $39